Denna produkt inkluderar 1 års begränsad garanti mot materialfel och tillverkningsfel.
Description
Diamond bit (cutter) for manicure and pedicure. The bit shank is made of stainless steel, and the working part is coated with synthetic diamond, which ensures precise processing, durability and ease of sterilisation.
Advantages:
* the abrasive surface consists of 100% synthetic diamond
* pressure on the cutting edges is distributed evenly
* crystals do not crumble
* the cutter works better and lasts longer
* high-quality stainless alloy – non-toxic
* Designed for autoclave and dry heat sterilisation
* Standard 2.35 mm shank (fits most manicure devices)
* Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
*Clean off any material residue,
*Rinse under running water,
*Dry completely before further processing,
*Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Diameter: 1,8
Working length: 8
Form: Cylinder
Advantages:
* the abrasive surface consists of 100% synthetic diamond
* pressure on the cutting edges is distributed evenly
* crystals do not crumble
* the cutter works better and lasts longer
* high-quality stainless alloy – non-toxic
* Designed for autoclave and dry heat sterilisation
* Standard 2.35 mm shank (fits most manicure devices)
* Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
*Clean off any material residue,
*Rinse under running water,
*Dry completely before further processing,
*Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Diameter: 1,8
Working length: 8
Form: Cylinder
Luna Bits Diamantborr Cylinder, 1,8 mm x 8 mm, Blå, Medium Grit
LNB-200213
* Observera att produktens färg kan skilja sig något från originalet beroende på skärminställningen
24.00 SEK
Taxes included.
Shipping calculated at checkout.
Garanti
GPSR
MOLIKO OÜ, Ehitajate tee 110, Tallinn, 13517, Estonia, sales@lunabits.eu
Description
Diamond bit (cutter) for manicure and pedicure. The bit shank is made of stainless steel, and the working part is coated with synthetic diamond, which ensures precise processing, durability and ease of sterilisation.
Advantages:
* the abrasive surface consists of 100% synthetic diamond
* pressure on the cutting edges is distributed evenly
* crystals do not crumble
* the cutter works better and lasts longer
* high-quality stainless alloy – non-toxic
* Designed for autoclave and dry heat sterilisation
* Standard 2.35 mm shank (fits most manicure devices)
* Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
*Clean off any material residue,
*Rinse under running water,
*Dry completely before further processing,
*Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Diameter: 1,8
Working length: 8
Form: Cylinder
Advantages:
* the abrasive surface consists of 100% synthetic diamond
* pressure on the cutting edges is distributed evenly
* crystals do not crumble
* the cutter works better and lasts longer
* high-quality stainless alloy – non-toxic
* Designed for autoclave and dry heat sterilisation
* Standard 2.35 mm shank (fits most manicure devices)
* Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
*Clean off any material residue,
*Rinse under running water,
*Dry completely before further processing,
*Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Diameter: 1,8
Working length: 8
Form: Cylinder